Flat-rolled products of other alloy steel, of a width of 600 mm or more
28 declarable lines
Heading 7225 covers flat-rolled products of alloy steel other than stainless steel, in widths of 600 mm or more. It is split first by steel type for silicon electrical steel, then by working state: hot-rolled in coils, hot-rolled not in coils, cold-rolled, and plated or coated. Lower-level breakouts turn on thickness of 4.75 mm, tool steel, high-speed steel, ball-bearing steel and high-nickel alloy steel.
Products in this heading
- Grain-oriented silicon electrical steel sheet in coils
- Hot-rolled alloy steel coil 4.75 mm or thicker
- Hot-rolled tool steel plate in cut lengths
- High-speed steel strip, cold-rolled
- Ball-bearing steel sheet under 4.75 mm
- Electrolytically zinc-plated alloy steel sheet
- Hot-dip zinc-coated alloy steel sheet
- High-nickel alloy steel plate, cold-rolled
How to choose the right subheading
- Confirm the steel is alloy steel other than stainless and the width is 600 mm or more
- Identify special grades: silicon electrical, tool steel, high-speed steel, ball-bearing steel, high-nickel alloy
- Determine the working state: hot-rolled in coils, hot-rolled not in coils, cold-rolled, or plated or coated
- For hot-rolled, check whether thickness is 4.75 mm or more or less than 4.75 mm
- For coated product, check whether the zinc coating is electrolytic or another method
Often confused with
- Heading 7219Flat-rolled stainless steel 600 mm or wider
Stainless steel is a separate heading; 7225 covers only other alloy steel.
- Heading 7208Hot-rolled nonalloy steel coil 600 mm or wider
Nonalloy steel flat-rolled products sit in 7208, not in the alloy steel heading.
- Heading 7209Cold-rolled nonalloy steel sheet 600 mm or wider
Cold-reduced nonalloy steel is classified in 7209.
- Heading 7226Alloy steel flat-rolled under 600 mm wide
Width under 600 mm moves the product out of 7225.
- Heading 7227Hot-rolled alloy steel bars in coils
Bars and rods are not flat-rolled products and are classified in 7227.
Frequently asked questions
What is the HTS code for grain-oriented silicon electrical steel sheet 600 mm or wider?
It is 7225.11.00.00, with a general (MFN) rate of Free. Non-grain-oriented silicon electrical steel of the same width goes in 7225.19.00.00, also Free.
What is the duty on hot-rolled alloy steel coil 4.75 mm or thicker?
General-purpose hot-rolled alloy steel coil of that thickness is 7225.30.30.50, general (MFN) Free. High-nickel alloy steel of the same description is 7225.30.30.05, also Free.
How do I classify zinc-coated alloy steel sheet 600 mm or wider?
Electrolytically plated or coated with zinc is 7225.91.00.00, general (MFN) Free. Sheet plated or coated with zinc by another method is 7225.92.00.00, also Free.
Guide written from the official schedule text. Rates quoted are general (MFN) rates; check the line page for trade agreement rates and the classification of your exact product.
All lines in heading 7225
- 7225.11.00.00Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of silicon electrical steel / Grain-orientedFree
- 7225.19.00.00Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of silicon electrical steel / OtherFree
- 7225.30.11.10Of a thickness of 4.75 mm or more / Of tool steel / Of high-speed steelFree
- 7225.30.11.80Of a thickness of 4.75 mm or more / Of tool steel / OtherFree
- 7225.30.30.05Of a thickness of 4.75 mm or more / Of high-nickel alloy steelFree
- 7225.30.30.50Of a thickness of 4.75 mm or more / OtherFree
- 7225.30.51.10Of a thickness of less than 4.75 mm / Of tool steel / Of high-speed steelFree
- 7225.30.51.80Of a thickness of less than 4.75 mm / Of tool steel / OtherFree
- 7225.30.70.00Of a thickness of less than 4.75 mm / OtherFree
- 7225.40.11.10Of a thickness of 4.75 mm or more / Of tool steel / Of high-speed steelFree
- 7225.40.11.80Of a thickness of 4.75 mm or more / Of tool steel / OtherFree
- 7225.40.30.05Of a thickness of 4.75 mm or more / Of high-nickel alloy steelFree
- 7225.40.30.50Of a thickness of 4.75 mm or more / OtherFree
- 7225.40.51.10Of a thickness of less than 4.75 mm / Of tool steel / Of high-speed steelFree
- 7225.40.51.30Of a thickness of less than 4.75 mm / Of tool steel / Of ball-bearing steelFree
- 7225.40.51.60Of a thickness of less than 4.75 mm / Of tool steel / OtherFree
- 7225.40.70.00Of a thickness of less than 4.75 mm / OtherFree
- 7225.50.11.10Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of tool steel / Of high-speed steelFree
- 7225.50.11.30Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of tool steel / Of ball-bearing steelFree
- 7225.50.11.60Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of tool steel / OtherFree
- 7225.50.60.00Of a thickness of 4.75 mm or moreFree
- 7225.50.70.00Of a thickness of less than 4.75 mm / Heat-resisting steelFree
- 7225.50.80.10Of a thickness of less than 4.75 mm / Of high-nickel alloy steelFree
- 7225.50.80.80Of a thickness of less than 4.75 mm / OtherFree
- 7225.91.00.00Electrolytically plated or coated with zincFree
- 7225.92.00.00Otherwise plated or coated with zincFree
- 7225.99.00.10Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of high-nickel alloy steelFree
- 7225.99.00.90Flat-rolled products of other alloy steel, of a width of 600 mm or more / OtherFree