7225.50.80.10
Of a thickness of less than 4.75 mm / Of high-nickel alloy steel
Classification path
- Flat-rolled products of other alloy steel, of a width of 600 mm or more
- Other, not further worked than cold-rolled (cold-reduced)
- Other
- Of a thickness of less than 4.75 mm
- Other
- Of high-nickel alloy steel
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 28%
- Unit of quantity
- kg
Related lines in heading 7225
- 7225.11.00.00Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of silicon electrical steel / Grain-orientedFree
- 7225.19.00.00Flat-rolled products of other alloy steel, of a width of 600 mm or more / Of silicon electrical steel / OtherFree
- 7225.30.11.10Of a thickness of 4.75 mm or more / Of tool steel / Of high-speed steelFree
- 7225.30.11.80Of a thickness of 4.75 mm or more / Of tool steel / OtherFree
- 7225.30.30.05Of a thickness of 4.75 mm or more / Of high-nickel alloy steelFree
- 7225.30.30.50Of a thickness of 4.75 mm or more / OtherFree
- 7225.30.51.10Of a thickness of less than 4.75 mm / Of tool steel / Of high-speed steelFree
- 7225.30.51.80Of a thickness of less than 4.75 mm / Of tool steel / OtherFree
- 7225.30.70.00Of a thickness of less than 4.75 mm / OtherFree
- 7225.40.11.10Of a thickness of 4.75 mm or more / Of tool steel / Of high-speed steelFree
- 7225.40.11.80Of a thickness of 4.75 mm or more / Of tool steel / OtherFree
- 7225.40.30.05Of a thickness of 4.75 mm or more / Of high-nickel alloy steelFree
About heading 7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more
Heading 7225 covers flat-rolled products of alloy steel other than stainless steel, in widths of 600 mm or more. It is split first by steel type for silicon electrical steel, then by working state: hot-rolled in coils, hot-rolled not in coils, cold-rolled, and plated or coated. Lower-level breakouts turn on thickness of 4.75 mm, tool steel, high-speed steel, ball-bearing steel and high-nickel alloy steel.
Full guide to heading 7225Products in this heading
- Grain-oriented silicon electrical steel sheet in coils
- Hot-rolled alloy steel coil 4.75 mm or thicker
- Hot-rolled tool steel plate in cut lengths
- High-speed steel strip, cold-rolled
- Ball-bearing steel sheet under 4.75 mm
- Electrolytically zinc-plated alloy steel sheet
- Hot-dip zinc-coated alloy steel sheet
- High-nickel alloy steel plate, cold-rolled
Frequently asked questions
What is the HTS code for grain-oriented silicon electrical steel sheet 600 mm or wider?
It is 7225.11.00.00, with a general (MFN) rate of Free. Non-grain-oriented silicon electrical steel of the same width goes in 7225.19.00.00, also Free.
What is the duty on hot-rolled alloy steel coil 4.75 mm or thicker?
General-purpose hot-rolled alloy steel coil of that thickness is 7225.30.30.50, general (MFN) Free. High-nickel alloy steel of the same description is 7225.30.30.05, also Free.
How do I classify zinc-coated alloy steel sheet 600 mm or wider?
Electrolytically plated or coated with zinc is 7225.91.00.00, general (MFN) Free. Sheet plated or coated with zinc by another method is 7225.92.00.00, also Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.