Heading 7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
76 declarable lines
Heading 7219 covers flat-rolled stainless steel products that are 600 mm or more in width. The heading splits first by working: hot-rolled in coils, hot-rolled not in coils, cold-rolled, and a residual Other group. Within each of those, lines are divided by thickness, then by coil form, width thresholds and alloy content such as nickel, molybdenum and chromium levels. Every line in this heading carries a general (MFN) rate of Free.
Products in this heading
- Hot-rolled stainless steel coil for welded pipe production
- Cold-rolled stainless steel sheet for appliance and range panels
- Stainless steel plate for chemical storage tanks
- Cold-rolled stainless strip for elevator and door cladding
- Stainless sheet for commercial kitchen counters and sinks
- High-nickel alloy stainless coil for corrosion-resistant process equipment
- Stainless steel sheet for architectural handrails and trim
How to choose the right subheading
- Whether the product is hot-rolled or cold-rolled, and whether it is further worked than hot-rolled or cold-rolled
- Whether the goods are in coils or not in coils
- Nominal thickness band: over 10 mm, 4.75 to 10 mm, 3 to 4.75 mm, 1 to 3 mm, 0.5 to 1 mm, or under 0.5 mm
- Width thresholds used in the subheadings, including 1370 mm, 1575 mm and 1880 mm
- Alloy content, including whether it is high-nickel alloy steel and the percentages of nickel, molybdenum and chromium
Often confused with
- Heading 7220Stainless steel strip or sheet cut to a width under 600 mm
Heading 7219 requires a width of 600 mm or more; narrower stainless flat-rolled products go to 7220.
- Heading 7222Stainless steel bars, rods, angles and shapes
Long products rather than flat-rolled products are classified in 7222.
- Heading 7218Stainless steel slabs and other semi-finished products
Semi-finished stainless steel is classified in 7218, not as flat-rolled product.
- Heading 7225Flat-rolled products of alloy steel other than stainless, 600 mm or wider
Heading 7219 is limited to stainless steel; other alloy steel flat-rolled products go to 7225.
Frequently asked questions
What is the HTS code for hot-rolled stainless steel coil over 10 mm thick?
Use 7219.11.00.30 if the width does not exceed 1575 mm, or 7219.11.00.60 if the width exceeds 1575 mm. Both carry a general (MFN) rate of Free.
What is the duty on cold-rolled stainless steel sheet 1 to 3 mm thick not in coils?
That product is classified at 7219.33.00.45 when the width is 1370 mm or more, with a general (MFN) rate of Free. Narrower material falls to 7219.33.00.70 or 7219.33.00.80, also Free.
How do I classify stainless steel flat-rolled product that is not hot-rolled in coils, hot-rolled not in coils, or cold-rolled?
It falls in the residual group, for example 7219.90.00.80 for Other > Other > Other > Other, or 7219.90.00.10 if it is high-nickel alloy steel. Both lines carry a general (MFN) rate of Free.
Guide written from the official schedule text. Rates quoted are general (MFN) rates; check the line page for trade agreement rates and the classification of your exact product.
All lines in heading 7219
- 7219.11.00.30Of a width not exceeding 1575 mmFree
- 7219.11.00.60Of a thickness exceeding 10 mm / Of a width exceeding 1575 mmFree
- 7219.12.00.02Of a thickness of 4.75 mm or more but not exceeding 10 mm / Not annealed or not pickledFree
- 7219.12.00.06Of a thickness of 4.75 mm or more but not exceeding 10 mm / Of high-nickel alloy steelFree
- 7219.12.00.21Of a width not exceeding 1575 mmFree
- 7219.12.00.26Of a thickness exceeding 6.8 mm / Of a width exceeding 1575 mmFree
- 7219.12.00.51Of a width not exceeding 1575 mmFree
- 7219.12.00.56Of a thickness of 4.75 mm or more but not exceeding 10 mm / Of a width of 1370 mm or more / Of a width exceeding 1575 mmFree
- 7219.12.00.66Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.12.00.71Containing more than 0.5 percent by weight of nickel / OtherFree
- 7219.12.00.81Of a thickness of 4.75 mm or more but not exceeding 10 mm / OtherFree
- 7219.13.00.02Of a thickness of 3 mm or more but less than 4.75 mm / Not annealed or not pickledFree
- 7219.13.00.31Of a thickness of 3 mm or more but less than 4.75 mm / Of a width of 1370 mm or moreFree
- 7219.13.00.51Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.13.00.71Containing more than 0.5 percent but less than 24 percent by weight of nickel / OtherFree
- 7219.13.00.81Of a thickness of 3 mm or more but less than 4.75 mm / OtherFree
- 7219.14.00.30Of a thickness of less than 3 mm / Of a width of 1370 mm or moreFree
- 7219.14.00.65Of a thickness of less than 3 mm / Of high-nickel alloy steelFree
- 7219.14.00.90Of a thickness of less than 3 mm / OtherFree
- 7219.21.00.05Of a thickness exceeding 10 mm / Of high-nickel alloy steelFree
- 7219.21.00.20Of a width not exceeding 1575 mmFree
- 7219.21.00.40Of a width exceeding 1575 mm but not exceeding 1880 mmFree
- 7219.21.00.60Of a thickness exceeding 10 mm / Of a width exceeding 1880 mmFree
- 7219.22.00.05Of a thickness of 4.75 mm or more but not exceeding 10 mm / Of high-nickel alloy steelFree
- 7219.22.00.15Of a width not exceeding 1575 mmFree
- 7219.22.00.20Of a width exceeding 1575 mm but not exceeding 1880 mmFree
- 7219.22.00.25Containing more than 1.5 percent but less than 5 percent by weight of molybdenum / Of a width exceeding 1880 mmFree
- 7219.22.00.35Of a width not exceeding 1575 mmFree
- 7219.22.00.40Of a width exceeding 1575 mm but not exceeding 1880 mmFree
- 7219.22.00.45Containing more than 0.5 percent by weight of nickel / Of a width exceeding 1880 mmFree
- 7219.22.00.70Of a width not exceeding 1575 mmFree
- 7219.22.00.75Of a width exceeding 1575 mm but not exceeding 1880 mmFree
- 7219.22.00.80Of a thickness of 4.75 mm or more but not exceeding 10 mm / Of a width exceeding 1880 mmFree
- 7219.23.00.30Of a thickness of 3 mm or more but less than 4.75 mm / Of a width of 1370 mm or moreFree
- 7219.23.00.60Of a thickness of 3 mm or more but less than 4.75 mm / OtherFree
- 7219.24.00.30Of a thickness of less than 3 mm / Of a width of 1370 mm or moreFree
- 7219.24.00.60Of a thickness of less than 3 mm / OtherFree
- 7219.31.00.10Of a thickness of 4.75 mm or more / In coilsFree
- 7219.31.00.50Of a thickness of 4.75 mm or more / Not in coilsFree
- 7219.32.00.05In coils / Of a width of 1370 mm or more / Of high-nickel alloy steelFree
- 7219.32.00.20Containing more than 0.5 percent by weight of nickelFree
- 7219.32.00.25In coils / Of a width of 1370 mm or more / OtherFree
- 7219.32.00.35Of a thickness of 3 mm or more but less than 4.75 mm / In coils / Of high-nickel alloy steelFree
- 7219.32.00.36Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.32.00.38Containing more than 0.5 percent by weight of nickel / OtherFree
- 7219.32.00.42Containing less than 15 percent by weight of chromiumFree
- 7219.32.00.44Of a thickness of 3 mm or more but less than 4.75 mm / In coils / OtherFree
- 7219.32.00.45Of a thickness of 3 mm or more but less than 4.75 mm / Not in coils / Of a width of 1370 mm or moreFree
- 7219.32.00.60Of a thickness of 3 mm or more but less than 4.75 mm / Not in coils / OtherFree
- 7219.33.00.05In coils / Of a width of 1370 mm or more / Of high-nickel alloy steelFree
- 7219.33.00.20Containing more than 0.5 percent by weight of nickelFree
- 7219.33.00.25In coils / Of a width of 1370 mm or more / OtherFree
- 7219.33.00.35Of a thickness exceeding 1 mm but less than 3 mm / In coils / Of high-nickel alloy steelFree
- 7219.33.00.36Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.33.00.38Containing more than 0.5 percent by weight of nickel / OtherFree
- 7219.33.00.42Containing less than 15 percent by weight of chromiumFree
- 7219.33.00.44Of a thickness exceeding 1 mm but less than 3 mm / In coils / OtherFree
- 7219.33.00.45Of a thickness exceeding 1 mm but less than 3 mm / Not in coils / Of a width of 1370 mm or moreFree
- 7219.33.00.70Containing more than 0.5 percent but less than 24 percent by weight of nickelFree
- 7219.33.00.80Of a thickness exceeding 1 mm but less than 3 mm / Not in coils / OtherFree
- 7219.34.00.05Of a thickness of 0.5 mm or more but not exceeding 1 mm / In coils / Of high-nickel alloy steelFree
- 7219.34.00.20Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.34.00.25Containing more than 0.5 percent by weight of nickel / OtherFree
- 7219.34.00.30Containing less than 15 percent by weight of chromiumFree
- 7219.34.00.35Of a thickness of 0.5 mm or more but not exceeding 1 mm / In coils / OtherFree
- 7219.34.00.50Of a thickness of 0.5 mm or more but not exceeding 1 mm / Not in coilsFree
- 7219.35.00.05Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.35.00.15Containing more than 0.5 percent but less than 24 percent by weight of nickel / OtherFree
- 7219.35.00.30Containing less than 15 percent by weight of chromiumFree
- 7219.35.00.35Of a thickness of less than 0.5 mm / In coils / OtherFree
- 7219.35.00.50Of a thickness of less than 0.5 mm / Not in coilsFree
- 7219.90.00.10Flat-rolled products of stainless steel, of a width of 600 mm or more / Of high-nickel alloy steelFree
- 7219.90.00.20Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.90.00.25Containing more than 0.5 percent by weight of nickel / OtherFree
- 7219.90.00.60Containing less than 15 percent by weight of chromiumFree
- 7219.90.00.80Flat-rolled products of stainless steel, of a width of 600 mm or more / OtherFree