7219.22.00.70
Of a width not exceeding 1575 mm
Classification path
- Flat-rolled products of stainless steel, of a width of 600 mm or more
- Not further worked than hot-rolled, not in coils
- Of a thickness of 4.75 mm or more but not exceeding 10 mm
- Other
- Other
- Of a width not exceeding 1575 mm
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 29%
- Unit of quantity
- kg
Related lines in heading 7219
- 7219.11.00.30Of a width not exceeding 1575 mmFree
- 7219.11.00.60Of a thickness exceeding 10 mm / Of a width exceeding 1575 mmFree
- 7219.12.00.02Of a thickness of 4.75 mm or more but not exceeding 10 mm / Not annealed or not pickledFree
- 7219.12.00.06Of a thickness of 4.75 mm or more but not exceeding 10 mm / Of high-nickel alloy steelFree
- 7219.12.00.21Of a width not exceeding 1575 mmFree
- 7219.12.00.26Of a thickness exceeding 6.8 mm / Of a width exceeding 1575 mmFree
- 7219.12.00.51Of a width not exceeding 1575 mmFree
- 7219.12.00.56Of a thickness of 4.75 mm or more but not exceeding 10 mm / Of a width of 1370 mm or more / Of a width exceeding 1575 mmFree
- 7219.12.00.66Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7219.12.00.71Containing more than 0.5 percent by weight of nickel / OtherFree
- 7219.12.00.81Of a thickness of 4.75 mm or more but not exceeding 10 mm / OtherFree
- 7219.13.00.02Of a thickness of 3 mm or more but less than 4.75 mm / Not annealed or not pickledFree
About heading 7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Heading 7219 covers flat-rolled stainless steel products that are 600 mm or more in width. The heading splits first by working: hot-rolled in coils, hot-rolled not in coils, cold-rolled, and a residual Other group. Within each of those, lines are divided by thickness, then by coil form, width thresholds and alloy content such as nickel, molybdenum and chromium levels. Every line in this heading carries a general (MFN) rate of Free.
Full guide to heading 7219Products in this heading
- Hot-rolled stainless steel coil for welded pipe production
- Cold-rolled stainless steel sheet for appliance and range panels
- Stainless steel plate for chemical storage tanks
- Cold-rolled stainless strip for elevator and door cladding
- Stainless sheet for commercial kitchen counters and sinks
- High-nickel alloy stainless coil for corrosion-resistant process equipment
- Stainless steel sheet for architectural handrails and trim
Frequently asked questions
What is the HTS code for hot-rolled stainless steel coil over 10 mm thick?
Use 7219.11.00.30 if the width does not exceed 1575 mm, or 7219.11.00.60 if the width exceeds 1575 mm. Both carry a general (MFN) rate of Free.
What is the duty on cold-rolled stainless steel sheet 1 to 3 mm thick not in coils?
That product is classified at 7219.33.00.45 when the width is 1370 mm or more, with a general (MFN) rate of Free. Narrower material falls to 7219.33.00.70 or 7219.33.00.80, also Free.
How do I classify stainless steel flat-rolled product that is not hot-rolled in coils, hot-rolled not in coils, or cold-rolled?
It falls in the residual group, for example 7219.90.00.80 for Other > Other > Other > Other, or 7219.90.00.10 if it is high-nickel alloy steel. Both lines carry a general (MFN) rate of Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.