8532.22.00.55
Exceeding 35 mm but not exceeding 51 mm in diameter
Classification path
- Electrical capacitors, fixed, variable or adjustable (pre-set); parts thereof
- Other fixed capacitors
- Aluminum electrolytic
- Exceeding 35 mm but not exceeding 51 mm in diameter
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 35%
- Unit of quantity
- No.
Related lines in heading 8532
- 8532.10.00.00Fixed capacitors designed for use in 50/60 Hz circuits and having a reactive power handling capacity of not less than 0.5 kvar (power capacitors)Free
- 8532.21.00.20Electrical capacitors, fixed, variable or adjustable (pre-set); parts thereof / Tantalum / Metal caseFree
- 8532.21.00.40Electrical capacitors, fixed, variable or adjustable (pre-set); parts thereof / Tantalum / DippedFree
- 8532.21.00.50Designed for surface mounting (SMD) by contactFree
- 8532.21.00.80Electrical capacitors, fixed, variable or adjustable (pre-set); parts thereof / Tantalum / OtherFree
- 8532.22.00.20Not exceeding 18 mm in diameterFree
- 8532.22.00.40Exceeding 18 mm but not exceeding 35 mm in diameterFree
- 8532.22.00.85Electrical capacitors, fixed, variable or adjustable (pre-set); parts thereof / Aluminum electrolytic / Exceeding 51 mm in diameterFree
- 8532.23.00.20Ceramic dielectric, single layer / ChipsFree
- 8532.23.00.40Ceramic dielectric, single layer / Axial leadsFree
- 8532.23.00.60Ceramic dielectric, single layer / Radial leadsFree
- 8532.24.00.20Ceramic dielectric, multilayer / ChipsFree
About heading 8532
Electrical capacitors, fixed, variable or adjustable (pre-set); parts thereof
Heading 8532 covers electrical capacitors: fixed, variable and adjustable (pre-set), plus their parts. It splits by capacitor type and, for fixed capacitors, by dielectric material such as tantalum, aluminum electrolytic, ceramic, paper or plastics, mica and other. All declarable lines in this heading carry a general (MFN) rate of Free.
Full guide to heading 8532Products in this heading
- Multilayer ceramic chip capacitors (MLCCs) for surface mounting
- Tantalum chip capacitors designed for surface mounting by contact
- Aluminum electrolytic capacitors, radial or snap-in, by diameter
- Power capacitors for 50/60 Hz circuits with at least 0.5 kvar reactive power
- Film capacitors with paper or plastics dielectric for AC service
- Mica or ceramic trimmer capacitors, pre-set adjustable type
- Bare capacitor parts such as cases, lids and terminal assemblies
Frequently asked questions
What is the HTS code for multilayer ceramic chip capacitors?
Multilayer ceramic dielectric capacitors in chip form are classified under 8532.24.00.20. The general (MFN) rate for that line is Free.
What is the duty on tantalum capacitors for surface mounting?
Tantalum capacitors designed for surface mounting by contact fall under 8532.21.00.50. The general (MFN) rate is Free.
How do I classify an aluminum electrolytic capacitor?
Use the case diameter to pick the line within 8532.22: for example, 8532.22.00.20 for diameters not exceeding 18 mm and 8532.22.00.40 for diameters exceeding 18 mm but not exceeding 35 mm. Both lines carry a general (MFN) rate of Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.