7606.91.30.95
With a thickness of 6.3 mm or less
Classification path
- Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm
- Other
- Of aluminum, not alloyed
- Not clad
- With a thickness of 6.3 mm or less
Rates of duty
- General (MFN)
- 3%
- Column 2Cuba, North Korea, Russia, Belarus
- 13.5%
- Unit of quantity
- kg
Trade agreement rates
Related lines in heading 7606
- 7606.11.30.30With a thickness of more than 6.3 mm3%
- 7606.11.30.60With a thickness of 6.3 mm or less3%
- 7606.11.60.00Rectangular (including square) / Of aluminum, not alloyed / Clad2.7%
- 7606.12.30.15High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter3%
- 7606.12.30.25Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter3%
- 7606.12.30.35With a thickness of more than 6.3 mm / Other3%
- 7606.12.30.45With a thickness of 6.3 mm or less / Aluminum can stock / Body stock3%
- 7606.12.30.55With a thickness of 6.3 mm or less / Aluminum can stock / Lid stock3%
- 7606.12.30.91Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter3%
- 7606.12.30.96With a thickness of 6.3 mm or less / Other3%
- 7606.12.60.00Rectangular (including square) / Of aluminum alloys / Clad6.5%
- 7606.91.30.55With a thickness of more than 6.3 mm3%
About heading 7606
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm
Heading 7606 covers aluminum plates, sheets and strip that are thicker than 0.2 mm, whether or not alloyed or clad. The heading splits first by shape, rectangular (including square) in 7606.11 and 7606.12 versus other shapes in 7606.91 and 7606.92, then by whether the metal is alloyed, whether it is clad, and whether thickness exceeds 6.3 mm. General (MFN) rates run from 2.7% to 6.5% depending on these factors.
Full guide to heading 7606Products in this heading
- Aluminum sheet cut to size from a mill roll
- Aluminum coil and strip for forming or stamping
- Aluminum plate over 6.3 mm thick for machining
- Aluminum can body stock
- Aluminum can lid stock
- Clad aluminum brazing sheet for heat exchangers
- Aluminum sheet blanks for signs or panels
- Non-rectangular aluminum blanks and circles cut from sheet
Frequently asked questions
What is the HTS code for aluminum alloy sheet in rectangular form that is not clad and 6.3 mm or less thick, not can stock?
Use 7606.12.30.96 for other aluminum alloy rectangular sheet, which carries a general (MFN) rate of 3%.
What is the duty on clad aluminum alloy sheet?
Clad rectangular aluminum alloy sheet is 7606.12.60.00 at a general (MFN) rate of 6.5%. Clad non-alloy rectangular sheet is 7606.11.60.00 at 2.7%.
How do I classify aluminum can body stock?
Aluminum alloy can body stock that is rectangular, not clad, and 6.3 mm or less thick is 7606.12.30.45 with a general (MFN) rate of 3%. Can lid stock of the same description goes in 7606.12.30.55, also at 3%.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.