7601.20.30.00
Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
Classification path
- Unwrought aluminum
- Aluminum alloys
- Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
Rates of duty
- General (MFN)
- 2.6%
- Column 2Cuba, North Korea, Russia, Belarus
- 18.5%
- Unit of quantity
- kg
Trade agreement rates
Related lines in heading 7601
- 7601.10.30.00Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils2.6%
- 7601.10.60.40Of 99.9 percent aluminum or greaterFree
- 7601.10.60.45Of greater than 99.8 percent but less than 99.9 percentFree
- 7601.10.60.90Unwrought aluminum / Aluminum, not alloyed / OtherFree
- 7601.20.60.00Containing 25 percent or more by weight of silicon2.1%
- 7601.20.90.30Aluminum vanadium master alloyFree
- 7601.20.90.45Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coilsFree
- 7601.20.90.60Unwrought aluminum / Aluminum alloys / Other, containing 0.03 percent or more by weight of lead (secondary aluminum)Free
- 7601.20.90.75Unwrought aluminum / Aluminum alloys / Remelt scrap ingotFree
- 7601.20.90.80Sheet ingot (slab) of a kind described in statistical note 3 to this chapterFree
- 7601.20.90.85Foundry ingot of a kind described in statistical note 4 to this chapterFree
- 7601.20.90.95Unwrought aluminum / Aluminum alloys / OtherFree
About heading 7601
Unwrought aluminum
Heading 7601 covers unwrought aluminum: metal in primary or secondary form that has not yet been worked into bars, rods, sheets, wire or other semi-finished products. It is split first by whether the metal is not alloyed (7601.10) or is an aluminum alloy (7601.20), then by form, such as coiled material of uniform cross section with a least dimension of 9.5 mm or less, casting stock, or ingot. Most ingot and billet lines enter free, while the coiled form lines carry a small general (MFN) rate.
Full guide to heading 7601Products in this heading
- Unalloyed aluminum ingots of 99.9% purity or greater
- Aluminum alloy foundry ingot for casting
- Remelt scrap ingot of aluminum alloys
- Aluminum alloy sheet ingot (slab) for rolling
- Aluminum billets of uniform circular cross section, not in coils
- Aluminum alloy wire rod in coils with a least cross-sectional dimension of 9.5 mm or less
- Aluminum vanadium master alloy
- Secondary aluminum alloy containing 0.03% or more by weight of lead
Frequently asked questions
What is the HTS code for aluminum alloy remelt scrap ingot?
Remelt scrap ingot of aluminum alloys is classified under 7601.20.90.75, which carries a general (MFN) rate of Free.
What is the duty on unwrought unalloyed aluminum of 99.9% purity or greater?
That metal falls under 7601.10.60.40 at a general (MFN) rate of Free. Coiled unalloyed aluminum of uniform cross section with a least dimension of 9.5 mm or less is classified under 7601.10.30.00 at 2.6%.
How do I classify aluminum alloy wire rod in coils?
Aluminum alloy stock of uniform cross section throughout its length, with a least cross-sectional dimension of 9.5 mm or less, in coils, is classified under 7601.20.30.00 at a general (MFN) rate of 2.6%. If the material is not in coils, look to the other 7601.20.90.xx lines instead.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.