7320.10.60.15
Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor
Classification path
- Springs and leaves for springs, of iron or steel
- Leaf springs and leaves therefor
- Suitable for motor vehicle suspension
- Other
- Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor
Rates of duty
- General (MFN)
- 3.2%
- Column 2Cuba, North Korea, Russia, Belarus
- 25%
- Unit of quantity
- kg
Trade agreement rates
Related lines in heading 7320
- 7320.10.30.00To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons3.2%
- 7320.10.60.60Suitable for motor vehicle suspension / Other3.2%
- 7320.10.90.15Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor3.2%
- 7320.10.90.60Leaf springs and leaves therefor / Other3.2%
- 7320.20.10.00Suitable for motor-vehicle suspension3.2%
- 7320.20.50.10Suitable for use in mattress supports and mattresses of heading 94043.9%
- 7320.20.50.20Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm / Other3.9%
- 7320.20.50.45Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm3.9%
- 7320.20.50.60Springs and leaves for springs, of iron or steel / Helical springs / Other3.9%
- 7320.90.10.00Springs and leaves for springs, of iron or steel / HairspringsFree
- 7320.90.50.10Suitable for use in mattress supports and mattresses of heading 94042.9%
- 7320.90.50.20Springs and leaves for springs, of iron or steel / Of wire / Other2.9%
About heading 7320
Springs and leaves for springs, of iron or steel
Heading 7320 covers springs made of iron or steel, plus the flat leaves used to build leaf springs. The heading splits first by type: leaf springs and leaves therefor (7320.10), helical springs (7320.20), and all other springs such as hairsprings and flat spiral springs (7320.90). Within each group the rate depends on whether the spring is for motor vehicle suspension, the wire thickness, or the leaf thickness.
Full guide to heading 7320Products in this heading
- Leaf springs and replacement leaves for light truck and trailer suspension
- Coil springs for passenger car suspension struts
- Helical coil springs used inside mattresses and mattress supports
- Hairsprings for watches, clocks and instruments
- Compression springs for valves and machinery
- Torsion springs for hinges and garage doors
- Flat spiral springs for retraction mechanisms
Frequently asked questions
What is the HTS code for coil springs for car suspension?
Helical springs suitable for motor vehicle suspension are classified under 7320.20.10.00, with a general (MFN) rate of 3.2%.
What is the duty on leaf springs for light truck suspension?
Leaf springs and leaves for motor vehicles with a G.V.W. not exceeding 4 metric tons fall under 7320.10.30.00, general (MFN) rate 3.2%. Heavier vehicle leaf springs with leaves 1.6 mm or more thick go to 7320.10.60.15 at the same 3.2% general (MFN) rate.
How do I classify coil springs used in mattresses?
Helical springs of wire under 5.1 mm in cross section that are suitable for mattress supports and mattresses of heading 9404 are classified under 7320.20.50.10, general (MFN) rate 3.9%. The finished mattress itself is not classified in 7320.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.