Heading 7306
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
68 declarable lines
Heading 7306 covers welded and similarly closed tubes, pipes and hollow profiles of iron or steel, other than seamless tubes of heading 7304 and very large circular pipe of heading 7305. It is split first by use (line pipe, casing and tubing for oil or gas drilling, then other welded pipe), then by steel type, cross section, wall thickness and outside diameter. Every declarable line in this heading carries a general (MFN) rate of Free.
Products in this heading
- Welded stainless steel line pipe for oil or gas pipelines
- Welded iron casing threaded or coupled for oil or gas drilling
- Galvanized welded round steel pipe imported with couplings
- Welded steel tube suitable for boilers, heat exchangers and condensers
- Square or rectangular welded steel tube with wall thickness under 4 mm
- Welded stainless steel tube with wall thickness under 1.65 mm
- Cold-drawn welded alloy steel pipe with outside diameter up to 114.3 mm
- Tapered welded steel tube used as a part of an illuminating article
How to choose the right subheading
- Steel type: stainless steel, iron or nonalloy steel, or other alloy steel
- End use: line pipe, casing and tubing for oil or gas drilling, or other pipe
- Cross section: circular or noncircular, and square or rectangular if noncircular
- Wall thickness: under 1.65 mm or 1.65 mm and over for circular pipe, and under or over 4 mm for noncircular
- Outside diameter brackets, particularly 114.3 mm, 50.8 mm and 406.4 mm
Often confused with
- Heading 7304Seamless steel pipe
7306 covers welded and similarly closed pipe; seamless pipe is classified in 7304.
- Heading 7305Welded circular pipe with outside diameter over 406.4 mm
Very large circular welded pipe is specifically covered by heading 7305.
- Heading 7307Steel pipe fittings such as elbows and couplings
Fittings are separate from the tube or pipe itself.
- Heading 7301Welded steel angles, shapes and sections, or sheet piling
Open sections and piling are not hollow profiles.
- Heading 7308Welded steel tube cut and prepared for use in a structure
Tubes prepared for structural use fall in 7308.
Frequently asked questions
What is the HTS code for welded stainless steel pipe with a wall thickness under 1.65 mm?
Use 7306.40.10.90 for other welded circular stainless steel pipe with a wall thickness under 1.65 mm. The general (MFN) rate is Free.
What is the duty on welded square steel tube with a wall thickness under 4 mm?
Square or rectangular welded tube of iron or nonalloy steel with a wall thickness under 4 mm is classified in 7306.61.50.00. The general (MFN) rate is Free.
How do I classify welded carbon steel pipe imported with couplings?
Galvanized welded circular iron or nonalloy steel pipe with a wall thickness of 1.65 mm or more and an outside diameter not exceeding 114.3 mm, imported with coupling, goes in 7306.30.50.26 or 7306.30.50.27 depending on diameter. Both carry a general (MFN) rate of Free.
Guide written from the official schedule text. Rates quoted are general (MFN) rates; check the line page for trade agreement rates and the classification of your exact product.
All lines in heading 7306
- 7306.11.00.10With an outside diameter not exceeding 114.3 mmFree
- 7306.11.00.50With an outside diameter exceeding 114.3 mmFree
- 7306.19.10.10With an outside diameter not exceeding 114.3 mmFree
- 7306.19.10.50With an outside diameter exceeding 114.3 mmFree
- 7306.19.51.10With an outside diameter not exceeding 114.3 mmFree
- 7306.19.51.50With an outside diameter exceeding 114.3 mmFree
- 7306.21.30.00Welded of stainless steel / Casing / Threaded or coupledFree
- 7306.21.40.00Welded of stainless steel / Casing / OtherFree
- 7306.21.80.10Welded of stainless steel / Tubing / Imported with couplingFree
- 7306.21.80.50Welded of stainless steel / Tubing / OtherFree
- 7306.29.10.30Of iron or nonalloy steel / Threaded or coupled / Imported with couplingFree
- 7306.29.10.90Of iron or nonalloy steel / Threaded or coupled / OtherFree
- 7306.29.20.00Casing / Of iron or nonalloy steel / OtherFree
- 7306.29.31.00Casing and tubing of a kind used in drilling for oil or gas / Casing / Threaded or coupledFree
- 7306.29.41.00Casing and tubing of a kind used in drilling for oil or gas / Casing / OtherFree
- 7306.29.60.10Tubing / Of iron or nonalloy steel / Imported with couplingFree
- 7306.29.60.50Tubing / Of iron or nonalloy steel / OtherFree
- 7306.29.81.10Casing and tubing of a kind used in drilling for oil or gas / Tubing / Imported with couplingFree
- 7306.29.81.50Casing and tubing of a kind used in drilling for oil or gas / Tubing / OtherFree
- 7306.30.10.10Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduitFree
- 7306.30.10.90Having a wall thickness of less than 1.65 mm / OtherFree
- 7306.30.30.00Tapered steel pipes and tubes principally used as parts of illuminating articlesFree
- 7306.30.50.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawnFree
- 7306.30.50.15Having a wall thickness of 1.65 mm or more / Other, cold-drawnFree
- 7306.30.50.20Having a wall thickness of 1.65 mm or more / Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mmFree
- 7306.30.50.26With an outside diameter not exceeding 50.8 mmFree
- 7306.30.50.27With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFree
- 7306.30.50.28Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduitFree
- 7306.30.50.31With an outside diameter not exceeding 50.8 mmFree
- 7306.30.50.33With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFree
- 7306.30.50.35Tube and pipe hollows for redrawingFree
- 7306.30.50.41With an outside diameter not exceeding 50.8 mmFree
- 7306.30.50.43With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFree
- 7306.30.50.56With an outside diameter not exceeding 50.8 mmFree
- 7306.30.50.57With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFree
- 7306.30.50.85With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm / GalvanizedFree
- 7306.30.50.90With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm / OtherFree
- 7306.40.10.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7306.40.10.15Containing more than 0.5 percent by weight of nickel / OtherFree
- 7306.40.10.90Having a wall thickness of less than 1.65 mm / OtherFree
- 7306.40.50.05Having a wall thickness of 1.65 mm or more / Of high-nickel alloy steelFree
- 7306.40.50.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawnFree
- 7306.40.50.40Containing more than 0.5 percent but less than 24 percent by weight of nickelFree
- 7306.40.50.42Containing less than 15 percent by weight of chromiumFree
- 7306.40.50.44Having a wall thickness of 1.65 mm or more / OtherFree
- 7306.40.50.62Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7306.40.50.64Containing more than 0.5 percent but less than 24 percent by weight of nickel / OtherFree
- 7306.40.50.80With an outside diameter not exceeding 114.3 mm / OtherFree
- 7306.40.50.85Containing more than 0.5 percent but less than 24 percent by weight of nickelFree
- 7306.40.50.90With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm / OtherFree
- 7306.50.10.00Having a wall thickness of less than 1.65 mmFree
- 7306.50.30.00Tapered pipes and tubes of steel principally used as parts of illuminating articlesFree
- 7306.50.50.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawnFree
- 7306.50.50.30Having a wall thickness of 1.65 mm or more / Other, cold-drawn or cold-rolled (cold- reduced)Free
- 7306.50.50.50With an outside diameter not exceeding 114.3 mmFree
- 7306.50.50.70With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFree
- 7306.61.10.00Having a wall thickness of 4 mm or more / Of iron or nonalloy steelFree
- 7306.61.30.00Having a wall thickness of 4 mm or more / Of alloy steelFree
- 7306.61.50.00Having a wall thickness of less than 4 mm / Of iron or nonalloy steelFree
- 7306.61.70.30Having a wall thickness of less than 4 mm / Of alloy steel / Of stainless steelFree
- 7306.61.70.60Having a wall thickness of less than 4 mm / Of alloy steel / OtherFree
- 7306.69.10.00Having a wall thickness of 4 mm or more / Of iron or nonalloy steelFree
- 7306.69.30.00Having a wall thickness of 4 mm or more / Of alloy steelFree
- 7306.69.50.00Having a wall thickness of less than 4 mm / Of iron or nonalloy steelFree
- 7306.69.70.30Having a wall thickness of less than 4 mm / Of alloy steel / Of stainless steelFree
- 7306.69.70.60Having a wall thickness of less than 4 mm / Of alloy steel / OtherFree
- 7306.90.10.00Of iron or nonalloy steelFree
- 7306.90.50.00Of alloy steelFree