7228.50.10.60
Of round or rectangular cross section with surfaces ground, milled or polished
Classification path
- Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
- Other bars and rods, not further worked than cold-formed or cold-finished
- Of tool steel (other than high-speed steel)
- Other
- With a maximum cross-sectional dimension of 18 mm or more
- Of round or rectangular cross section with surfaces ground, milled or polished
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 29%
- Unit of quantity
- kg
Related lines in heading 7228
- 7228.10.00.10Bars and rods, of high-speed steel / Not cold-formedFree
- 7228.10.00.30With a maximum cross-sectional dimension of less than 18 mmFree
- 7228.10.00.60With a maximum cross-sectional dimension of 18 mm or moreFree
- 7228.20.10.00Bars and rods, of silico-manganese steel / Not cold-formedFree
- 7228.20.50.00Bars and rods, of silico-manganese steel / Cold-formedFree
- 7228.30.20.00Of tool steel (other than high-speed steel) / Of ball-bearing steelFree
- 7228.30.40.00Of chipper knife steel, not cold-formedFree
- 7228.30.60.00Of tool steel (other than high-speed steel) / OtherFree
- 7228.30.80.05Of high-nickel alloy steelFree
- 7228.30.80.10Concrete reinforcing bars and rodsFree
- 7228.30.80.15With a diameter or cross section measuring less than 76 mmFree
- 7228.30.80.41With a diameter or cross section measuring 76 mm or more but not exceeding 152 mmFree
About heading 7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
Heading 7228 covers bars, rods, angles, shapes, sections and hollow drill bars of alloy steel other than stainless steel. The heading splits first by product form and working: high-speed steel and silico-manganese steel bars, hot-rolled or extruded bars, forged bars, cold-formed bars, other bars, angles and sections, and hollow drill bars. Every line in this heading carries a general (MFN) rate of Free.
Full guide to heading 7228Products in this heading
- High-speed steel bar stock for cutting tools
- Silico-manganese steel bars for spring making
- Tool steel flat bars, not cold-formed
- Ball-bearing steel bars, cold-finished
- Alloy steel concrete reinforcing bars, hot-rolled
- Hot-rolled alloy steel H sections for structural frames
- Hollow drill bars for mining drill steel
- Alloy steel angles with a cross section under 76 mm
Frequently asked questions
What is the HTS code for high-speed steel bars?
Bars and rods of high-speed steel that are not cold-formed go in 7228.10.00.10. Cold-formed high-speed steel bars go in 7228.10.00.30 if the maximum cross-sectional dimension is less than 18 mm, or 7228.10.00.60 if it is 18 mm or more. All three carry a general (MFN) rate of Free.
What is the duty on alloy steel angles and shapes?
Hot-rolled alloy steel U, I, H and T sections that are not drilled, punched or otherwise advanced are classified in 7228.70.30.10. Other hot-rolled angles and shapes of 76 mm or more are in 7228.70.30.20 and 7228.70.30.41. The general (MFN) rate for these lines is Free.
How do I classify cold-finished alloy steel bars?
First decide whether the steel is tool steel. Cold-finished tool steel bars of ball-bearing steel go in 7228.50.10.10, and other tool steel bars go in lines such as 7228.50.10.40, at a general (MFN) rate of Free. Cold-finished alloy steel that is not tool steel goes in 7228.50.50.15 for sizes under 76 mm, also Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.