7226.92.80.05
Of a thickness exceeding 0.25 mm / Of high-nickel alloy steel
Classification path
- Flat-rolled products of other alloy steel, of a width of less than 600 mm
- Other
- Not further worked than cold-rolled (cold-reduced)
- Other
- Of a width of less than 300 mm
- Of a thickness exceeding 0.25 mm
- Of high-nickel alloy steel
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 33%
- Unit of quantity
- kg
Related lines in heading 7226
- 7226.11.10.00Of silicon electrical steel / Grain-oriented / Of a width of 300 mm or moreFree
- 7226.11.90.30Of thickness not exceeding 0.25 mmFree
- 7226.11.90.60Of a width of less than 300 mm / OtherFree
- 7226.19.10.00Flat-rolled products of other alloy steel, of a width of less than 600 mm / Of silicon electrical steel / Of a width of 300 mm or moreFree
- 7226.19.90.00Of a width of less than 300 mmFree
- 7226.20.00.00Flat-rolled products of other alloy steel, of a width of less than 600 mm / Of high-speed steelFree
- 7226.91.05.00Of tool steel (other than high-speed steel) / Of chipper knife steelFree
- 7226.91.15.30Of tool steel (other than high-speed steel) / Of a width of 300 mm or more / Of ball-bearing steelFree
- 7226.91.15.60Of tool steel (other than high-speed steel) / Of a width of 300 mm or more / OtherFree
- 7226.91.25.30Of a width of less than 300 mm / Of ball-bearing steelFree
- 7226.91.25.60Of a width of less than 300 mm / OtherFree
- 7226.91.50.00Of a thickness of 4.75 mm or moreFree
About heading 7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm
Heading 7226 covers flat-rolled products of alloy steel other than stainless steel, in coils or cut lengths, with a width under 600 mm. It is split first by steel type: silicon electrical steel, high-speed steel, and all other alloy steel. The remaining subheadings turn on how the strip was worked (hot-rolled, cold-rolled, or further worked such as plated or coated), then on width thresholds of 300 mm and thickness thresholds of 0.25 mm and 4.75 mm.
Full guide to heading 7226Products in this heading
- Grain-oriented silicon electrical steel strip 300 mm wide or more
- High-speed steel strip under 600 mm wide
- Chipper knife steel strip, hot-rolled
- Ball-bearing steel strip, cold-rolled, 300 mm or wider
- Zinc-electroplated other alloy steel strip
- Cold-rolled high-nickel alloy steel strip under 0.25 mm thick
- Hot-rolled tool steel strip under 300 mm wide
Frequently asked questions
What is the HTS code for grain-oriented silicon electrical steel strip 300 mm wide or more?
It is classified under 7226.11.10.00. The general (MFN) rate for that line is Free.
What is the duty on cold-rolled other alloy steel strip under 300 mm wide and over 0.25 mm thick?
That merchandise falls under 7226.92.80.50 when it is not high-nickel alloy steel. The general (MFN) rate is Free.
How do I classify hot-rolled other alloy steel strip that is 4.75 mm thick or more?
Use 7226.91.50.00 for hot-rolled strip of other alloy steel, not further worked, at a thickness of 4.75 mm or more, excluding tool steel and high-speed steel lines. The general (MFN) rate is Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.