7221.00.00.30
With a diameter of 14 mm or more but less than 19 mm
Classification path
- Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
- Other
- Of circular cross section
- With a diameter of 14 mm or more but less than 19 mm
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 11%
- Unit of quantity
- kg
Related lines in heading 7221
- 7221.00.00.05Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel / Of high-nickel alloy steelFree
- 7221.00.00.17Containing less than 8 percent by weight of nickelFree
- 7221.00.00.18Containing 8 percent or more but less than 24 percent by weight of nickelFree
- 7221.00.00.45With a diameter of 19 mm or moreFree
- 7221.00.00.75Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel / OtherFree
About heading 7221
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
Heading 7221 covers stainless steel bars and rods that are hot-rolled and wound into irregularly wound coils, which is the coil form sold for drawing, re-rolling or further processing. The heading splits first by high-nickel alloy steel, then for other goods by whether the cross section is circular, and if circular by diameter and, for small diameters, by nickel content. All declarable lines in this heading carry a general (MFN) rate of Free.
Full guide to heading 7221Products in this heading
- Hot-rolled stainless steel wire rod in irregularly wound coils
- Stainless steel coiled bar stock of circular cross section, 10 mm diameter, 6% nickel
- Stainless steel coiled rod of circular cross section, 12 mm diameter, 10% nickel
- Stainless steel coiled bar of circular cross section, 16 mm diameter
- Stainless steel coiled rod of circular cross section, 22 mm diameter
- High-nickel alloy steel bars in irregularly wound coils
- Hot-rolled stainless steel rod in coils with a hexagonal cross section
Frequently asked questions
What is the HTS code for hot-rolled stainless steel wire rod in coils?
It depends on the cross section and size. A circular rod under 14 mm in diameter with less than 8% nickel is classified under 7221.00.00.17, and a circular rod of 19 mm or more in diameter is classified under 7221.00.00.45.
What is the duty on stainless steel bars in irregularly wound coils?
The general (MFN) rate is Free on every line in heading 7221, including 7221.00.00.30 for circular cross sections of 14 mm or more but less than 19 mm in diameter and 7221.00.00.75 for non-circular or other forms.
How do I classify a coiled stainless rod with a circular cross section of 12 mm and 10% nickel?
Because the diameter is under 14 mm and the nickel content is 8% or more but less than 24%, it falls under 7221.00.00.18, which carries a general (MFN) rate of Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.