7220.20.10.60
Containing less than 15 percent by weight of chromium
Classification path
- Flat-rolled products of stainless steel, of a width of less than 600 mm
- Not further worked than cold-rolled (cold-reduced)
- Of a width of 300 mm or more
- Other
- Containing less than 15 percent by weight of chromium
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 29%
- Unit of quantity
- kg
Related lines in heading 7220
- 7220.11.00.00Of a thickness of 4.75 mm or moreFree
- 7220.12.10.00Of a thickness of less than 4.75 mm / Of a width of 300 mm or moreFree
- 7220.12.50.00Of a width of less than 300 mmFree
- 7220.20.10.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7220.20.10.15Containing more than 0.5 percent but less than 24 percent by weight of nickel / OtherFree
- 7220.20.10.80Not further worked than cold-rolled (cold-reduced) / Of a width of 300 mm or more / OtherFree
- 7220.20.60.05Of a thickness exceeding 1.25 mm / Of high-nickel alloy steelFree
- 7220.20.60.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
- 7220.20.60.15Containing more than 0.5 percent by weight of nickel / OtherFree
- 7220.20.60.60Containing less than 15 percent by weight of chromiumFree
- 7220.20.60.80Of a thickness exceeding 1.25 mm / OtherFree
- 7220.20.70.05Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm / Of high-nickel alloy steelFree
About heading 7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Heading 7220 covers flat-rolled stainless steel products that are less than 600 mm wide. It is split first by whether the steel is hot-rolled or cold-rolled, then by thickness and width, and finally by chemical content such as nickel, molybdenum and chromium levels. All lines in this heading carry a general (MFN) rate of Free.
Full guide to heading 7220Products in this heading
- Cold-rolled stainless steel strip coils under 600 mm wide
- Razor blade steel in narrow cold-rolled strip
- Stainless steel shim stock in thicknesses under 0.25 mm
- Hot-rolled stainless steel strip 4.75 mm and thicker
- Narrow stainless steel coil for springs and cutlery parts
- High-nickel alloy steel strip for chemical equipment
- Cold-reduced stainless strip 300 mm or wider for stamping
Frequently asked questions
What is the HTS code for cold-rolled stainless steel strip 300 mm or wider?
It falls in subheading 7220.20.10 and the line depends on chemistry. For example, 7220.20.10.60 covers cold-rolled strip 300 mm or wider containing less than 15% by weight of chromium, at a general (MFN) rate of Free.
What is the duty on hot-rolled stainless steel strip under 600 mm wide?
The general (MFN) rate is Free. Hot-rolled product of a thickness of 4.75 mm or more is 7220.11.00.00, and hot-rolled product under 4.75 mm with a width of 300 mm or more is 7220.12.10.00.
How do I classify razor blade steel in narrow strip?
Razor blade steel that is cold-rolled, under 300 mm wide, and not over 0.25 mm thick is classified in 7220.20.80.00. The general (MFN) rate for that line is Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.