7215.10.00.10
Containing by weight 0.1 percent or more of lead
Classification path
- Other bars and rods of iron or nonalloy steel
- Of free-cutting steel, not further worked than cold-formed or cold-finished
- Containing by weight 0.1 percent or more of lead
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 0.3¢/kg + 20%
- Unit of quantity
- kg
Related lines in heading 7215
- 7215.10.00.80Of free-cutting steel, not further worked than cold-formed or cold-finished / OtherFree
- 7215.50.00.16With a diameter or cross section measuring less than 76 mmFree
- 7215.50.00.18With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmFree
- 7215.50.00.20With a diameter or cross section exceeding 228 mmFree
- 7215.50.00.61With a diameter or cross section measuring less than 76 mmFree
- 7215.50.00.63With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmFree
- 7215.50.00.65With a diameter or cross section exceeding 228 mmFree
- 7215.50.00.90Containing by weight 0.6 percent or more of carbonFree
- 7215.90.10.00Plated or coated with metal / Not cold-formedFree
- 7215.90.30.00Plated or coated with metal / Cold-formedFree
- 7215.90.50.00OtherFree
About heading 7215
Other bars and rods of iron or nonalloy steel
Heading 7215 covers bars and rods of iron or nonalloy steel that are not hot-rolled, forged, extruded or otherwise covered by heading 7214, mainly cold-formed or cold-finished material and bars that have been further worked such as plated or coated. The heading splits first by whether the steel is free-cutting, then by whether the bar is only cold-formed, and finally by carbon content and cross-section size for cold-formed bars. The remaining subheadings cover plated or coated bars and other further-worked bars.
Full guide to heading 7215Products in this heading
- Cold-drawn free-machining steel bar stock containing lead
- Cold-finished round steel shaft blanks
- Cold-drawn keystock in 0.25 to 0.6% carbon steel
- Nickel-plated cold-drawn steel rod for machining
- Cold-finished flat steel bar under 76 mm across
- Polished steel rod that has been further worked beyond cold forming
Frequently asked questions
What is the HTS code for cold-finished leaded free-cutting steel bar?
Use 7215.10.00.10 for free-cutting steel not further worked than cold-formed or cold-finished that contains 0.1% or more of lead by weight. Its general (MFN) rate is Free.
What is the duty on cold-drawn nonalloy steel rod under 76 mm with 0.3% carbon?
That bar is classified in 7215.50.00.61, covering cold-formed bar with 0.25% or more but less than 0.6% carbon and a cross section under 76 mm. The general (MFN) rate is Free.
How do I classify metal-coated steel bar that is not cold-formed?
Plated or coated bar that has not been cold-formed goes in 7215.90.10.00 at a general (MFN) rate of Free. If the coated bar is cold-formed, the correct line is 7215.90.30.00, also Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.