HTSBase
Heading 7211

Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated

25 declarable lines

Heading 7211 covers flat-rolled products of iron or nonalloy steel that are less than 600 mm wide and are not clad, plated or coated. It is split first by hot-rolled, cold-rolled, or other processing, then by factors such as universal mill plate, thickness, width less than 300 mm, carbon content, high-strength steel, and coil form. Every declarable line listed in this heading has a general (MFN) rate of Free.

Products in this heading

  • Hot-rolled steel strip less than 600 mm wide
  • Cold-reduced steel strip less than 600 mm wide
  • Pickled hot-rolled steel strip
  • Universal mill plate less than 600 mm wide
  • High-strength steel strip less than 600 mm wide
  • Narrow steel coil with untrimmed edges
  • Cold-rolled low-carbon steel strip

How to choose the right subheading

  • Confirm the product is iron or nonalloy steel, not stainless steel or other alloy steel.
  • Confirm the width is less than 600 mm and the product is not clad, plated or coated.
  • For hot-rolled goods, check whether it is universal mill plate, 4.75 mm or more thick, or other hot-rolled, and then check width less than 300 mm, high-strength steel, pickled condition, and coil form.
  • For cold-rolled goods, check whether carbon is less than 0.25%, then check width less than 300 mm, thickness over 1.25 mm, over 0.25 mm but not over 1.25 mm, or not over 0.25 mm, and high-strength or narrow coil status.
  • Use 7211.90.00.00 for goods in heading 7211 that are not covered by the hot-rolled or cold-rolled subheadings.

Often confused with

  • Hot-rolled steel sheet 600 mm or wider

    Heading 7211 requires a width less than 600 mm.

    Heading 7208
  • Cold-rolled steel sheet 600 mm or wider

    Heading 7211 requires a width less than 600 mm.

    Heading 7209
  • Clad, plated or coated steel strip less than 600 mm wide

    Heading 7211 covers products that are not clad, plated or coated.

    Heading 7212
  • Stainless steel strip less than 600 mm wide

    Heading 7211 is limited to iron or nonalloy steel.

    Heading 7220
  • Other alloy steel strip less than 600 mm wide

    Heading 7211 does not cover other alloy steel.

    Heading 7226

Frequently asked questions

What is the HTS code for pickled hot-rolled steel strip less than 600 mm wide?

Pickled hot-rolled strip of iron or nonalloy steel less than 600 mm wide is classified in 7211.19.60.00. Its general (MFN) rate is Free.

What is the duty on cold-rolled low-carbon steel strip less than 600 mm wide?

For example, 7211.23.60.30 has a general (MFN) rate of Free. All declarable lines listed under heading 7211 show Free.

How do I classify cold-rolled nonalloy steel strip less than 300 mm wide and over 1.25 mm thick?

If it is high-strength steel, use 7211.23.15.00; otherwise use 7211.23.20.00. Both codes have a general (MFN) rate of Free.

Guide written from the official schedule text. Rates quoted are general (MFN) rates; check the line page for trade agreement rates and the classification of your exact product.

All lines in heading 7211

HTS heading 7211: Flat-rolled products of iron or nonalloy steel, of a width... | HTSBase