4412.39.40.59
With at least one outer ply of Agathis spp. / Other
Classification path
- Plywood, veneered panels and similar laminated wood
- Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness
- Other, with both outer plies of coniferous wood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- Other
- With at least one outer ply of Agathis spp.
- Other
Rates of duty
- General (MFN)
- 8%
- Column 2Cuba, North Korea, Russia, Belarus
- 40%
- Unit of quantity
- m3
Trade agreement rates
Related lines in heading 4412
- 4412.10.05.00Plywood, veneered panels and similar laminated wood / Of bamboo / Plywood8%
- 4412.10.90.00Plywood, veneered panels and similar laminated wood / Of bamboo / OtherFree
- 4412.31.06.20Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in lengthFree
- 4412.31.06.40With a face ply of birch (Betula spp.) / Not surface coveredFree
- 4412.31.06.60With a face ply of birch (Betula spp.) / OtherFree
- 4412.31.26.10With a face ply of Spanish cedar (Cedrela spp.)8%
- 4412.31.26.20With a face ply of walnut (Juglans spp.)8%
- 4412.31.42.00With a face ply of mahogany (Swietenia spp. or Khaya spp.)8%
- 4412.31.45.00Panels not exceeding 3.6 mm in thickness and exceeding 1.2 m in width and 2.2 m in length8%
- 4412.31.48.50Panels not exceeding 3.6 mm in thickness and not exceeding 1.2 m in width and 2.2 m in length8%
- 4412.31.48.60Dark Red Meranti, Light Red Meranti or White Lauan (Luan) (Shorea spp.)8%
- 4412.31.48.63Limba (Terminalia spp.), also known as Terminalia and Nargusta8%
About heading 4412
Plywood, veneered panels and similar laminated wood
Heading 4412 covers plywood, veneered panels and similar laminated wood, including laminated veneered lumber (LVL) and blockboard, laminboard and battenboard. The heading splits first by product type: plywood of sheets under 6 mm per ply, LVL, blockboard type panels, and a residual other group. Each group then splits by the species of the outer ply (bamboo, tropical wood, other nonconiferous wood, or coniferous wood), and further by surface covering, face species, panel dimensions and sanding.
Full guide to heading 4412Products in this heading
- Standard construction plywood sheathing with coniferous outer plies
- Birch-faced plywood panels for furniture and cabinetry
- Bamboo plywood sheets
- Plywood with a mahogany or meranti face ply
- Laminated veneered lumber (LVL) beams and headers
- Blockboard panels used for shelving and doors
- Plywood flooring panels with a wood wear layer
- Douglas fir sanded plywood panels
Frequently asked questions
What is the HTS code for bamboo plywood?
Bamboo plywood falls under 4412.10.05.00 at a general (MFN) rate of 8%. Other bamboo panels in the heading go in 4412.10.90.00 at a general (MFN) rate of Free.
What is the duty on plywood with a birch face ply?
Plywood with at least one outer ply of nonconiferous wood and a face ply of birch, not surface covered, is classified in 4412.33.06.40 at a general (MFN) rate of Free. Small panels within the dimension limits go in 4412.33.06.20, also at a general (MFN) rate of Free.
How do I classify plywood with both outer plies of Douglas fir?
If it is rough or touch sanded for sizing only, use 4412.39.40.11 at a general (MFN) rate of 8%. If it is fully sanded on at least one face but not further processed, use 4412.39.40.12 at a general (MFN) rate of 8%.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.