4411.93.60.00
Not surface covered (except for oil treatment)
Classification path
- Fiberboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances
- Other
- Of a density exceeding 0.5 g/cm3 but not exceeding 0.8 g/cm3
- Other
- Other
- Not surface covered (except for oil treatment)
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 30%
- Unit of quantity
- m3
Related lines in heading 4411
- 4411.12.10.00Not mechanically worked or surface coveredFree
- 4411.12.20.00Laminated boards bonded in whole or in part, or impregnated, with synthetic resins1.9¢/kg + 1.5%
- 4411.12.30.00Of a thickness not exceeding 5 mm / OtherFree
- 4411.12.60.00Not surface covered (except for oil treatment)Free
- 4411.12.90.10Of a thickness not exceeding 5 mm / Standard wood molding3.9%
- 4411.12.90.90Of a thickness not exceeding 5 mm / Other3.9%
- 4411.13.10.00Not mechanically worked or surface coveredFree
- 4411.13.20.00Laminated boards bonded in whole or in part, or impregnated, with synthetic resins1.9¢/kg + 1.5%
- 4411.13.30.00Of a thickness exceeding 5 mm but not exceeding 9 mm / OtherFree
- 4411.13.60.00Not surface covered (except for oil treatment)Free
- 4411.13.90.10Of a thickness exceeding 5 mm but not exceeding 9 mm / Standard wood molding3.9%
- 4411.13.90.90Of a thickness exceeding 5 mm but not exceeding 9 mm / Other3.9%
About heading 4411
Fiberboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances
Heading 4411 covers fiberboard made of wood or other ligneous materials, whether or not bonded with resins or other organic substances. The heading is split first by product type: medium density fiberboard (MDF) lines 4411.12 through 4411.14 are grouped by thickness, and the remaining lines 4411.92 through 4411.94 are grouped by density. Within each group, classification then turns on whether the board is mechanically worked or surface covered, and whether it is tongued, grooved or rabbetted for building use.
Full guide to heading 4411Products in this heading
- Medium density fiberboard (MDF) panels for cabinet and furniture making
- MDF boards laminated or impregnated with synthetic resins
- MDF standard wood molding profiles
- High density fiberboard (density over 0.8 g/cm3) sheets
- Fiberboard tileboard worked along the edges for wall or ceiling installation
- Bitumen-impregnated low density fiberboard panels
- Uncoated fiberboard sheets with only an oil treatment
Frequently asked questions
What is the HTS code for MDF panels over 9 mm thick that are not surface covered?
Unworked, uncovered medium density fiberboard over 9 mm thick is classified under 4411.14.10.00, with a general (MFN) rate of Free.
What is the duty on MDF standard wood molding?
Standard wood molding of MDF falls under 4411.14.90.10 when over 9 mm thick and under 4411.13.90.10 when over 5 mm but not over 9 mm. Both carry a general (MFN) rate of 3.9%.
How do I classify fiberboard tileboard for wall construction?
Fiberboard of a density exceeding 0.8 g/cm3 that is continuously worked along its edges and dedicated for walls, ceilings or other building parts is classified under 4411.92.30.00, with a general (MFN) rate of Free. Fiberboard over 0.5 but not over 0.8 g/cm3 that is tongued, grooved or rabbetted for building use and not laminated with synthetic resins goes under 4411.93.30.00, also Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.