4408.10.01.45
Coniferous / Other
Classification path
- Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm
- Coniferous
- Other
Rates of duty
- General (MFN)
- Free
- Column 2Cuba, North Korea, Russia, Belarus
- 20%
- Unit of quantity
- m2
Related lines in heading 4408
- 4408.10.01.25Coniferous / Douglas firFree
- 4408.31.01.00Dark Red Meranti, Light Red Meranti and Meranti BakauFree
- 4408.39.02.10Of tropical wood / Spliced or end-jointedFree
- 4408.39.02.20Acajou or Acajou d'Afrique (Khaya spp.), also known as African mahoganyFree
- 4408.39.02.30Anigre (Aningeria spp.), also known as Aningre, Aniegre or AnegreFree
- 4408.39.02.40Of tropical wood / Ceiba (Ceiba spp.)Free
- 4408.39.02.50Obeche (Triplochiton spp.), also known as AyousFree
- 4408.39.02.60Of tropical wood / Okoume (Aucoumea spp.)Free
- 4408.39.02.70Sapele (Sapelli), Sipo or Utile (Entandrophragma spp.)Free
- 4408.39.02.91Of tropical wood / OtherFree
- 4408.90.01.05Spliced or end-jointed / Ash (Fraxinus spp.)Free
- 4408.90.01.10Spliced or end-jointed / Birch (Betula spp.)Free
About heading 4408
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm
Heading 4408 covers thin wood veneer sheets, 6 mm or less in thickness, that are sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed. These sheets are used to face plywood and similar laminated wood or as decorative veneer. The heading splits first by wood type: coniferous (4408.10), tropical wood (4408.31 and 4408.39), and other wood (4408.90), then by species and by whether the sheets are spliced or end-jointed.
Full guide to heading 4408Products in this heading
- Sliced red oak veneer sheets for cabinet faces
- Rotary peeled Douglas fir veneer for plywood core facing
- Spliced or end-jointed maple veneer rolls for edge banding
- Okoume veneer sheets for marine plywood facing
- Dark Red Meranti veneer sheets
- Birch veneer sheets for Baltic plywood
- Walnut decorative veneer for furniture panels
- African mahogany (Khaya spp.) veneer sheets
Frequently asked questions
What is the HTS code for sliced Douglas fir veneer?
Sliced Douglas fir veneer of a thickness not exceeding 6 mm falls under 4408.10.01.25, which carries a general (MFN) rate of Free.
What is the duty on birch veneer sheets?
Birch veneer that is not spliced or end-jointed is classified under 4408.90.01.61 at a general (MFN) rate of Free. Spliced or end-jointed birch veneer goes under 4408.90.01.10, also Free.
How do I classify okoume veneer?
Okoume (Aucoumea spp.) is a tropical wood, so veneer of it falls under 4408.39.02.60 with a general (MFN) rate of Free. If the sheets are spliced or end-jointed, classify under 4408.39.02.10 instead, also Free.
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.