3917.40.00.10
For brake hoses for the vehicles of subheadings 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, 8705 or 8711
Classification path
- Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics
- Fittings
- For brake hoses for the vehicles of subheadings 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, 8705 or 8711
Rates of duty
- General (MFN)
- 5.3%
- Column 2Cuba, North Korea, Russia, Belarus
- 80%
- Unit of quantity
- kg
Trade agreement rates
Related lines in heading 3917
- 3917.10.10.00Of cellulosic plastics materials6.5%
- 3917.10.60.00Artificial guts (sausage casings) of hardened protein or of cellulosic plastics materials / Of collagenFree
- 3917.10.90.00Artificial guts (sausage casings) of hardened protein or of cellulosic plastics materials / Other4.2%
- 3917.21.00.00Tubes, pipes and hoses, rigid / Of polymers of ethylene3.1%
- 3917.22.00.00Tubes, pipes and hoses, rigid / Of polymers of propylene3.1%
- 3917.23.00.00Tubes, pipes and hoses, rigid / Of polymers of vinyl chloride3.1%
- 3917.29.00.50Tubes, pipes and hoses, rigid / Of other plastics / Less than 200 mm in length3.1%
- 3917.29.00.90Tubes, pipes and hoses, rigid / Of other plastics / Other3.1%
- 3917.31.00.00Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa3.1%
- 3917.32.00.10Of polyvinyl chloride3.1%
- 3917.32.00.20Of polyethylene3.1%
- 3917.32.00.50Other3.1%
About heading 3917
Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics
Heading 3917 covers tubes, pipes and hoses and fittings for them, all of plastics. It is split into artificial guts, rigid tubes and pipes, other tubes and hoses, and fittings. The subheadings depend on the plastic material, rigidity, reinforcement, fittings and fitting end use.
Full guide to heading 3917Products in this heading
- Artificial sausage casings of cellulosic plastics
- Rigid polyethylene water pipe
- Rigid PVC pipe
- Flexible PVC hose without fittings
- Metal-reinforced plastic hose
- Plastic pipe elbows and joints
- PVC DWV plumbing fittings
- Plastic brake hose fittings for vehicles
Frequently asked questions
What is the HTS code for rigid PVC pipe?
Rigid tubes, pipes and hoses of polymers of vinyl chloride are classified under 3917.23.00.00, with a general (MFN) rate of 3.1%.
What is the duty on plastic plumbing fittings?
Plumbing fittings not pressure rated (DWV) of PVC fall under 3917.40.00.20 at 5.3% general (MFN); other DWV plastic fittings use 3917.40.00.50, also 5.3%.
How do I classify flexible plastic hose with fittings?
If it is not reinforced or otherwise combined with other materials and has fittings, use 3917.33.00.00 at 3.1% general (MFN). If it is reinforced with metal, use 3917.39.00.10 at 3.1% general (MFN).
Source: USITC Harmonized Tariff Schedule, retrieved October 21, 2026.